GALA PULSE SYNERGIC DR ADVANCED. Instructions Manual
26
4.2.2 MIG PROCESS (STD + PULSED ARC).
THE PULSED ARC TYPE REQUIRES THE ENABLING OF A SPECIFIC PROCESS MODULE.
THE APPLICATION OF THE PULSED CURRENT PERMITS ADAPTING THE HEAT INPUT TO THE
WELDING DEMANDS, MARQUED FOR THE POSITION, TYPE OF JOINT AND THICKNESS, AS WELL AS
A CONSIDERABLE REDUCTION IN THE NUMBER OF SPATTERS.
KEY
ACTION
DESCRIPTION
P1
Return to Main Menu
P2
Access to Programme Library
P3
Access to Operation Mode / Synergic Programme Selection
P4
Access to Cycle Parameters
It accesses to the specific cycle of the selected mode.
P5
Select Secondary Value
Temporarily places value in leading position.
E1
Modify Main Correction
It adjusts the welding arc correction.
Modify Secondary Correction
It adjusts the dynamic welding correction.
E2
Modify Main Value
It adjusts the welding intensity.
THE EQUIPMENT SHALL PROVIDE AN INDICATIVE REFERENCE THICKNESS AS WELL AS THE
REPORTED WIRE SPEED.
ARC CORRECTION
Negative setting: Closed Arc, tendency to short circuit. Ideal for applications with very tight angles and
long Stick Out.
Positive setting: Open Arc, temperature increase. Recommended for the execution of wider beads.
DYNAMIC CORRECTION
Negative setting: Reduction of drop size and increase of forward speed. The arc becomes harder, and
there are more spatters.
Positive setting: Increase of drop size and reduction of forward speed. The arc becomes softer and the
heat input increases.
