2 RADAR MAP
8
Entering marks/lines at cursor or own ship position
1. Set the mark entry method to “CURSOR or “OWN SHIP POSN” as
appropriate, following “Choosing mark entry method” on page 7.
2. Press the [MARK] key to show ENTER MARK menu.
[ENTER MARK]
MARK 01
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
NAV LINE
17
COAST LINE
18
CONTOUR LINE
19
PROHIBITED AREAS
20
CABLE
21
LINE CHANGE
22
MARK CANCEL
Enter mark menu
3.
For entry at own ship’s position,
enter mark number to choose desired
mark, followed by the [ENTER] key. The chosen mark appears at own ship
position.
4.
For entry by cursor,
operate the trackball to place the cursor on the position
desired for the mark. Enter mark number to choose desired mark and then
press the [ENTER] key. The chosen mark appears at the cursor position.
5.
To inscribe a line,
first set the mark entry method to “cursor,” following
“Choosing mark entry method” on page 7.) Then, do the following:
a) Use the trackball to place the cursor on the starting point of the line.
b) Enter desired line number with the numeric keys and press the [ENTER]
key.
c) Use the trackball to place the cursor on a next point of the line and then
press the [ENTER] key.
d) Repeat c) to continue drawing the line.
6. To escape the mark entry mode, press the [MARK] key.
Содержание RP-340
Страница 1: ...VIDEO PLOTTER RP 340...