manualshive.com logo in svg

Furuno DS-8500, Руководство по установке

Поделиться
Скачать
Furuno DS-8500 Скачать руководство пользователя страница 70

APPENDIX 2 DIGITAL INTERFACE

AP-4

VTG - Course over ground and ground speed

ZDA - Time and date

Output sentences

 

ALC - Cyclic alert list

ALF - Alert sentence

$**VTG,x.x,T,x.x,M,x.x,N,x.x,K,a*hh <CR><LF>

              1  2   3  4   5  6   7   8 9

1. Course over ground, degrees True (0.00 to 359.99)
2. T=True (fixed)
3. Course over ground, degrees Magnetic (No use)
4. M=Magnetic (fixed)
5. Speed over ground, knots (0.00 to 999.99)
6. N=Knots (fixed)
7. Speed over ground (0.00 to 999.99)
8. K=km/h (fixed)
9. Mode indicator (A=Autonomous,  D=Differential  P=Precise)

$- - ZDA,hhmmss.ss,xx,xx,xxxx,xx,xx*hh<CR><LF>
                         1         2   3    4     5  6
1. UTC (000000 to 235959.99)
2. Day (01 to 31, UTC)
3. Month (01 to 12, UTC)
4. Year (0000 to 9999, UTC)
5. Local zone, hours (No use)
6. Local zone, minutes (No use)

$**ALC,xx,xx,xx,xx, aaa,x.x,x.x,x.x,’’’’’’*hh<CR><LF>

             1  2   3   4    5    6    7    8    9          

1. Total number of sentences this message (01 to 99)
2. Sentence number (01 to 99)
3. Sequential message identifier (00 to 99)
4. Number of alert entries (0 to 3)
5. Manufacturer mnemonic code (FEC)
6. Alert identifier (211000 to 211999)
7. Alert instance (1 to 2, null)
8. Revision counter (1 to 99)
9. Additional alert entries (same as #5 to #8)

$**ALF,x,x,x,hhmmss.ss,a,a,a,aaa,x.x,x.x,x.x,x,c--c*hh<CR><LF>    
            1 2 3         4         5 6 7   8    9   10  11 12  13          
1. Total number of ALF sentences this message (1, 2)
2. Sentence number (1, 2)
3. Sequential message identifier (0 to 9)
4. Time of last change (hhmmss.ss, hh: 00 to 23, mm: 00 to 59, ss.ss: 00.00 to 59.99, null)
5. Alert category (B=Alert category B, null when #2 is 2)
6. Alert priority (C=Caution, null when #2 is 2)
7. Alert state (A=ACked, N=Normal state, null when #2 is 2)
8. Manufacturer mnemonic code (FEC)
9. Alert identifier (211000 to 211999)
10. Alert instance (1 to 2, null)
11. Revision counter (1 to 99)
12. Escalation counter (0 to 9)
13. Alert text (max. 16 characters)

Содержание DS-8500































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды