manualshive.com logo in svg

Furuno DS-8500, Руководство по установке

Поделиться
Скачать
Furuno DS-8500 Скачать руководство пользователя страница 10

1.  MOUNTING

1-4

3. Secure the hanger to the desktop or overhead with four self-tapping screws 

(

φ

5

×

20, installation material). The hanger should be oriented with the insertion 

slots facing forward. For mounting dimensions and required clearance, see the 
outline drawing at the back of this manual.

4. Referring to section 2.3.2, connect the cabling to the display unit.
5. Fit the display unit to the hanger and tighten the bolts on either side evenly. Adjust 

the angle of the display unit so that the screen can be viewed clearly.

1.1.5

How to flush mount the display unit

There are two methods for flush mounting the display unit, flush mounting the display 
unit directly to the installation location or with using the optional front fixing panel kit.

Note: 

For flush mounting in a panel, the mounting surface must be flat. Do not install 

the unit on an uneven surface.

Flush mounting the display unit (unit only)

1. Cut a hole in the installation location, using the template at the back of this man-

ual.

2. Drill four holes for the self-tapping screws (

φ

3

×

20).

3. Place the display unit on a firm, flat surface, then unfasten the two knobs on either 

side of the display unit to separate the display unit and a hanger. The hanger can 
be disposed.

4. Gently lift the locking tabs at the 

rear of the front panel, then the re-
move the front panel. Be careful 
not to damage the locking tabs or 
the front panel.

5. Fit the supplied F Mount Cushion (20-032-1064) to the rear of the display unit or 

to the installation hole.

Desktop installation

Overhead installation

Rear view of Display Unit

Lift these locking tabs 
(8 locations)

Lift these locking tabs 
(8 locations)

Front panel

Front panel

Содержание DS-8500































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды