Furuno 9ZWWR2120, Руководство по установке

Страница: 37 / 67

S2E-17-0209_IM_WR2120_C
33
5.3. Data Processing Unit
1. Setup Data Processing Unit
(1) Connect DC power cable of DPU-PS to
DPU.
(2) Connect AC power cable to DPU-PS and
connect AC power cable to electrical
outlet.
Note
: Power “ON” ATU first and then power
“ON” DPU.
Note
: By default DPU will boot up
automatically and RainMap (radar
software) come up automatically
when DC power supplied.
(3) Connect display to DVI port, And connect
keyboard and mouse to USB port.
(4) Connect LAN cable from ATU (SPU
module inside the ATU) to LAN1 port.
(5) Connect LAN cable from MONI-CON
(inside the ATU) to USB port via bundled
USB-LAN adapter.
(6) Connect LAN cable from router to LAN2
port for using Internet. And the router and
the LAN cable for Internet is local supply.
Notice
:
1) Bundled cable is dedicated for Japan and
US use and can be used up to 125V.
Appropriate power cable should be
prepared for each site location.
2) Do not use the same IP address on ATU.
3) Do not put heavy object on the DPU. It may
deform the DPU chassis.
(1)
(4)
(5)
(6)
(3)
Power switch button
(1)
(6)
(5)
(4)
AC cable
(3)
(2)
DC cable