Furuno 9ZWWR2120, Руководство по установке

Страница: 33 / 67

S2E-17-0209_IM_WR2120_C
29
2. Connect LAN cable for MONI-CON and SPU
3. Wire the power filter
Caution: Make sure all electric current is off.
1) Fix / Connect AC power cable (3pin)
2) Confirm wiring on the circuit diagram of
power filter label before connecting.
3) Connect the LINE side to match the line
color of LOAD side.
4. Insert the cable into the protective tube
(2 pcs).
Protective Tube A1:
- AC Power cable (3cores)
- LAN cable
- Control (HDR) cable x2
Protective Tube A2:
- Signal (SMA) cable (x3/set)
(*1) Attach cables tightly using cable ties
while leaving extra cable length for strain
relief at all connections.
(1) HDR cable: 26 pin
(2) LAN cable: MONI-CON
(3) SMA cable: Rx_IF_H
(4) SMA cable: Rx_IF_V
(5) SMA cable: Tx_IF
(6) HDR cable: 14 pin
Type JIS
P/L Line Black
N Neutral White
E Ground Green
SPU LAN connector
MONI-CON LAN connector
(1)
(6)
(3)
(4)
(5)
(2)
Figure 5.11: Power filter
<Wire color>
P/L: Phase/Live
N: Neutral
E: Earth / Ground
DO NOT forget to cover it
Fix cables using cable ties
(*1)
. Fix signal (SMA) cable
Fix AC power cable
Fix control (HDR) & LAN cables
A1 A2