Furuno 9ZWWR2120, Руководство по установке

Страница: 31 / 67

S2E-17-0209_IM_WR2120_C
27
10. For reducing from the wind-induced movement, fasten the spring clamp above the base flange
and tighten bottom hex nut by hand.
* Do not damage the radome gasket when fasten the spring clamps.
* Use the spring clamp properly as examples shown below.
Bad examples:
Aviod contact between the antenna
feed arm and the radome internal
flange when lifting radome top.
Figure 5.10:
Antenna inside radome
Figure 5.7:
Space between spring clamp
and radome base flange
Figure 5.8:
Spring clamp is
inclined
Figure 5.9:
Fasten spring clamp only
partially
Figure 5.6: Fasten properly by spring
clamp
Approx. 330mm