Furuno 9ZWWR2120, Руководство по установке

Страница: 3 / 67

S2E-17-0209_IM_WR2120_C
iii
WARNING LABEL
Warning labels are attached to the equipment. Do not remove any label.
If a label is missing or damaged, contact us for the replacement.
WR2120 restrictions
There are restrictions frequency band as follows to use at Switzerland, Lithuania and Slovakia.
Operate the WR2120 using one of the following four channels:
CH1: 9422.5MHz, CH2: 9427.5MHz, CH3: 9432.5MHz, CH4: 9437.5MHz
POWER SUPPLY LABEL
100-240 VAC
SINGLE PHASE, 50/60 Hz
POWER CONSUMPTION: MAX. 350W
RATED AMPERE: 3.5-2.4A (100-150VAC)
1.8-1.5A (200-240VAC)
Do not disassemble or modify the equipment.
Fire or electrical shock can occur.
Use only the specified power cable.
Fire or damage to the equipment can result if a different cable is used.
Use the power supply grounded certainly.
Electrical shock or defect of operation can occur.
When a thunderbolt is expected, do not approach a system or
do not touch a hand.
There is a possibility of receiving an electric shock.
A worker's safety is guaranteed however the radar’s internal protection devices only
protect against indirect lightning and surges to the radar components. In case of a direct
lightning strike these protection devices may not protect radar or surrounding personnel.
Attach securely protective earth to the unit.
The protective earth (grounding) is required to the AC power supply to prevent electrical
shock.
CAUTION
Do not put liquid-filled containers on the top of the equipment.
Fire or electrical shock can occur if a liquid spills into the equipment.
Establish best possible surrounding space for apparatus.
This helps eliminate performance degradation and failure.
Do impact the LCD glass.
Serious injury may occur due to broken glass.
Name: Radiation Warning Label
Type: 03-142-3201-0
Code No.: 100-266-890-10