Furuno 9ZWWR2120, Руководство по установке

Страница: 21 / 67

S2E-17-0209_IM_WR2120_C
17
5. CONSTRUCTION
During the environmental survey all installation places for DPU, cables, pipes, and mounting plate
should be carefully considered.
5.1. Antenna Unit
This radar can be divided into 3 parts as shown below.
5.1.1. Method to divide the unit
1) Put antenna unit on a workbench
Loosen the 12, M10 bolts around the radome and remove the top part of the radome.
Lift up the top part of radome high enough to check the position of antenna. Because the
antenna may hit the flange inside the top part of radome, change the position of the
antenna feed arm upward if it is facing horizontally.
Use some pillows or lumber under the bottom edge of the radome top that will make easier
to put hands under radome when lifting up. Do not place directly on the floor or it will be
hard to lift up without space under the radome.
Pillow or lumbers
Floor
Caution: Move antenna to
position feed arm vertically
to ensure no contact when
lifting radome top.
Antenna
Workbench
[mm]
Top part of radome Base of radome
Internal unit