Furukawa electric S153 Ver.2, Руководство пользователя

Страница: 64 / 164

Operating Instructions
7-2
The arc check function inspects how far the fibers melt back
and the centered position of the fiber is located. If the arc
check results
are good, the message “RESULT: OK” is
displayed in the pop-up window. Press OK key to return to
the Menu screen.
If the results of the arc check fails, “RESULT: NG Try again” is
displayed. Press Retry and the machine will automatically
adjust the arc power, and then return to the Menu screen.
5. When NG is shown, repeat the arc check to determine the
new values until they are acceptable. It is necessary to
remove the fibers and re-prepare them again with a new
cleave before performing next arc check. If unsatisfactory
results are obtained after four (4) arc check attempts, inspect
the electrodes for wear or damage, and replace them if
necessary.
♦
A visual arc check can be made by viewing the arc on the monitor by pressing key. Electrode
discharge should produce a straight and steady arc. Swaying in the arc indicates that the
electrodes require either cleaning or replacing.
♦
When the “Data Output” in the “Parameter” of “Setting” menu is set “Active” or “PC”, detailed arc