Furukawa electric S153 Ver.2 Скачать руководство пользователя страница 11

Страница: 11 / 164

Safety Information and Instructions

1-3

1.3. WARNINGS and CAUTIONS

WARNING

This is a Class A product of EN 55022(1998). In a domestic environment this product

may cause radio interference in which case the user may be required to take
adequate measures.

The power cord supplied with this equipment must be connected to a power socket,

which provides a reliable protective earth. Or, ground it with the Ground terminal on
the fusion splicer.

Use only the cords attached to the fusion splicer. Connecting inappropriate cords or

extending the cords may cause them to heat up abnormally and may cause fire.

This product contains a Lithium Cell. The device is identified by a warning label. Do

not dispose of in fire. Disposal of this device must be carried out by qualified
personnel.

Содержание S153 Ver.2





































































































































































Результаты поиска

Содержание S153 Ver.2

Отзывы:

Бренды по названию

Популярные бренды

Furukawa electric S153 Ver.2, Руководство пользователя

Результаты поиска

Содержание S153 Ver.2

Отзывы:

Бренды по названию

Популярные бренды