Page 38
FCO770 Users Guide Issue 1
verify that BCD inputs have been read correctly. Note that the outputs are in
the order 80-40-20-10-8-4-2-1.
o
BCD X100
When 100 or more products are required this provides the x100 BCD digit.
Note that the outputs are in the order x-x-x-x-x-x-200-100 where ‘x’ is an
unused input.
o
STEP OUTPUTS 1-8
Each of the product steps 1 through 8 has a unique output.
o
TEST O/P A-H
The states of outputs A to H are programmed in each test for specific jig
control in each set of test data. These need to be enabled in the Global Settings
menu.
o
USER O/P A-H
The function of each of the eight outputs can be selected from a list. This may
be used for special functions or where jigging requires an output combination
that is not met by the predefined banks.
o
PASS/FAIL 1-4
Used for multiple part testing. The results of steps 1 to 4 are latched until
reset. There are four pass outputs, A-D and four fail outputs E-H.
o
PASS/FAIL 5-8
Used for multiple part testing. The results of steps 5 to 8 are latched until
reset. There are four pass outputs A-D and four fail outputs E-H.
o
STEP OUTPUTS 9-16
Each of the product steps 9 through 16 has a unique output.
o
JIG RESULTS
The multi-jig function latches the product pass and product fail results for each
jig. There are four pass outputs A-D and four fail outputs E-H. The multi-jig
function is described in a separate section of this guide.
o
FEEDBACK RESULT STATUS
When the feedback inputs are used it can be helpful to have an indication of
which of the A-H signals are in error.
USER OUTPUT A-H
•
Define the usage of each of the eight programmable functions. These are only used if
the User Programmed function block is chosen for use by an output bank.
•
Options: See the output function list on page 40.
PNEUMATIC OUTPUTS 1-5
•
Define the usage of each of the pneumatic outputs. The standard instrument has two
pneumatic outputs with build options for up to five pneumatic outputs. These may be
used internally for some options, or made available via rear panel ports.
•
Options: See the output function list on page 40.
Содержание FCO770
Страница 2: ......
