manualshive.com logo in svg

FurnacePros LA-309, Руководство пользователя

Владелец печи FurnacePros LA-309 может скачать бесплатное руководство по эксплуатации на нашем сайте. Этот полезный ресурс предоставляет подробное описание функций и инструкции по эксплуатации для вашего удобства. Получите свой экземпляр сейчас на manualshive.com и овладейте всеми возможностями вашей печи.

Поделиться
Скачать
background image

 
Product Specification 

Page 9 of 18 

1303090MS01 

LA-309 Controlled Atmosphere Infrared Furnace 

 

April 15, 2009 

9.0 SOFTWARE 

CONTROL 

9.1

 

Overview.

  The furnace control system shall consist of an 

OIT

 and 

PLC

. The OIT shall allow 

operators to view and control furnace operation, store and retrieve production process recipes, 
handle system alarms and log furnace events, and communicate with the PLC.  The PLC shall 
locally send and receive information to/from the OIT and process furnace IO (input/output) to 
control the furnace.    

9.2

 

PLC

.

  The furnace controller (PLC) shall be a commercial 32-bit industrial controller that 

provides real-time control and communication to the furnace IO. The controller shall provide 
10/100 Mbps Fast Ethernet communication to the OIT PC. The furnace controller shall 
generate and process all alarms and safety features. All sensor and control inputs and outputs 
shall be optically isolated to insure integrity of the controller.  In case of loss of communication 
between the OIT and the controller, the controller shall continue to operate the furnace 
normally until communication is re-established with the PC.   

9.3

 

OIT

.

 Operators communicate with the PLC is through an OIT (operator interface terminal) 

graphical user interface running on a Windows-based PC located at the furnace.  The PC shall 
include a local PC monitor, keyboard and mouse at the system console mounted on top of the 
furnace cabinet.  

9.3.1

 

The OIT hardware shall include a WindowsXP™ Dell Optiplex™ managed-platform 

computer (

PC

). 

9.3.1.1

 

The PC shall be equipped with a RAID Level 1 system consisting of two (2) mirrored 

hard drives to provide ongoing automatic system data backup to insure continuous operation 
and integrity of the furnace program, process recipes and data in case of hard disk drive failure. 

9.3.1.2

 

The PC shall be equipped to store all operational software, user-defined recipes and 

profiles for retrieval for archive or use in furnace operation.   

9.3.1.3

 

The PC shall be equipped with an optical CDRW for software restoration and 

archival storage. 

9.3.1.4

 

The furnace and computer shall include and offer access to USB ports for easy 

transfer of recipes and operation of temperature profiling systems. 

9.3.1.5

 

The PC shall include a TCP/IP Ethernet port for communication with the furnace 

controller.  

9.3.1.6

 

The Furnace shall include a second TCP/IP port for providing network access and, if 

internet enabled, factory diagnostic support.  In addition to the second TCP/IP connection, a 
modem shall be installed to provide a second method of remote factory diagnostic support. 

9.3.2

 

The PC and monitor shall be wired directly to the furnace primary transformer thereby 

bypassing the control system on/off switch. This unswitched arrangement allows reliable 
startup and shutdown of the PC under the WindowsXP™ operating system, allows the PC and 
monitors to be used without powering up the furnace, and extends PC life and reliability.  

9.4

 

ProControl™ Furnace Software   

9.4.1

 

The software shall consist of Logic and the OI.  The PC shall contain the program and logic 

that is downloaded to the PLC. On startup an OI compiled runtime program shall load and run 
the Furnace graphical user interface software.  

9.4.2

 

Logic.

  The PLC shall use Flow Chart based logic consisting of two primary blocks. The 

Operation block shall contain the basic program complete with multilevel case statements and 
if-then-else logic and loops to reduce program size and increases speed.  Condition blocks shall 
contain additional program AND/OR conditions for furnace operation and feedback. 

9.4.2.1

 

Conveyor speed

 shall be regulated by a stand-alone motor speed controller, which 

accepts commands from the control system. The motor speed controller in return shall provide 
the control system with the actual speed of the motor. A separate interface shall be used to 

Содержание LA-309



























































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для LA-309

Daikin DM80VC Service Instructions Manual preview
DM80VC
Бренд: Daikin Страницы: 82
ICP N9MSE0401712A Service And Technical Support Manual preview
N9MSE0401712A
Бренд: ICP Страницы: 27
Lennox G40UH Series Installation Instructions Manual preview
G40UH Series
Бренд: Lennox Страницы: 34
Yumpu 9MPT050F12A Installation Instructions Manual preview
9MPT050F12A
Бренд: Yumpu Страницы: 66
Yamato FP102 Instruction Manual preview
FP102
Бренд: Yamato Страницы: 75
Carrier F96VTN Installation Instructions Manual preview
F96VTN
Бренд: Carrier Страницы: 80
Barnstead 30400 Operation Manual preview
30400
Бренд: Barnstead Страницы: 56
ICP NOMF105D12A Installation Instructions And Owner'S Manual preview
NOMF105D12A
Бренд: ICP Страницы: 20
Bryant Deluxe 340AAV Service And Maintenance Instructions preview
Deluxe 340AAV
Бренд: Bryant Страницы: 20
Bryant CONDENSING GAS FURNACE 355MAV Installation, Start-Up, And Operating Instructions Manual preview
CONDENSING GAS FURNACE 355MAV
Бренд: Bryant Страницы: 52
ICP H9UHX060F12A Installation Instructions Manual preview
H9UHX060F12A
Бренд: ICP Страницы: 52
VERDER TZF 12/38/400 Installation, Operation And Maintenance Instructions preview
TZF 12/38/400
Бренд: VERDER Страницы: 74
VERDER TZF 12/65/550 Installation, Operation And Maintenance Instructions preview
TZF 12/65/550
Бренд: VERDER Страницы: 74
American Standard *DD-R Series User'S Information Manual preview
*DD-R Series
Бренд: American Standard Страницы: 12
American Standard Noncondensing Gas Furnaces User'S Information Manual preview
Noncondensing Gas Furnaces
Бренд: American Standard Страницы: 24
American Standard AUD2B060AFV32A Installer'S Manual preview
AUD2B060AFV32A
Бренд: American Standard Страницы: 30
American Standard L8V1A040U3VSAA Installer'S Manual preview
L8V1A040U3VSAA
Бренд: American Standard Страницы: 48

Бренды по названию

Популярные бренды

Загрузить еще бренды