FIRE OR EXPLOSION HAZARD
This furnace is not designed for use in mobile
homes, trailers or recreational vehicles.
Such use could result in death, bodily injury
and/or property damage.
!
DIRECT VENT GAS FURNACE
FAN ASSISTED,
* Denotes Brands (C, H, T)
Electric Shock Hazard
Turn Off All Power Before
Servicing.
Failure to do so can result in
death, personal injury and/or
property damage.
International Comfort Products Corporation (USA)
Lewisburg, TN 37091
INSTALLER: Affix these instructions
on or adjacent to the furnace.
CONSUMER: Retain these
instructions for future reference.
!
Printed in U.S.A.
LP1
4/29/2003
440 01 2020 (01)
*9MPT & *9MPV
SAFETY REQUIREMENTS
Recognize safety information. This is the safety--alert symbol
!
. When you see this symbol on the furnace and in instructions manuals be alert to
the potential for personal injury.
Understand the signal words
DANGER, WARNING,
or
CAUTION.
These words are used with the safety--alert symbol.
DANGER
identifies the most
serious hazards, those that
will
result in severe personal injury or death.
WARNING
signifies a hazard that
could
result in personal injury or death.
CAUTION
is used to identify unsafe practices that
could
result in minor personal injury or product and property damage.
Installing and servicing heating equipment can be hazardous due to gas and electrical components. Only trained and qualified personnel should
install, repair, or service heating equipment.
Untrained service personnel can perform basic maintenance functions such as cleaning and replacing air filters. All other operations must be
performed by trained service personnel. When working on heating equipment, observe precautions in the literature, on tags, and on labels attached
to or shipped with the unit and other safety precautions that may apply.
Follow all safety codes. In the United States, follow all safety codes including the current edition National Fuel Gas Code (NFGC) ANSI
Z223.1--2002/NFPA No. 54--2002. In Canada, refer to the current edition of the National Standard of Canada Natural Gas and Propane Installation
Code (NSCNGPIC) CSA B149.1--00. Wear safety glasses and work gloves. Have fire extinguisher available during start--up and adjustment
procedures and service calls.
These instructions cover minimum requirements and conform to existing national standards and safety codes. In some instances, these instructions
exceed certain local codes and ordinances, especially those that may not have kept up with changing residential construction practices. We require
these instructions as a minimum for a safe installation.
Table of Contents
1. Safe Installation Requirements
3
. . . . . . . . . . . . . . . . .
2. Installation
4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Combustion & Ventilation Air
7
. . . . . . . . . . . . . . . . . .
4. Vent & Combustion Air Piping
10
. . . . . . . . . . . . . . . .
5. Gas Supply and Piping
26
. . . . . . . . . . . . . . . . . . . . . .
6. Electrical Wiring
30
. . . . . . . . . . . . . . . . . . . . . . . . . . .
7. Ductwork and Filter
31
. . . . . . . . . . . . . . . . . . . . . . . .
8. Checks and Adjustments
34
. . . . . . . . . . . . . . . . . . . .
9. Furnace Maintenance
36
. . . . . . . . . . . . . . . . . . . . . . .
10. Sequence of Operation & Diagnostics
37
. . . . . . . . . .
11. Concentric Vent Termination
43
. . . . . . . . . . . . . . . . .
Tech Support and Parts
47
. . . . . . . . . . . . . . . . . . . . . . .
Summary of Contents for 9MPT050F12A
Page 46: ...46 440 01 2020 01...
