manualshive.com logo in svg

FurnacePros LA-309, Руководство пользователя

Владелец печи FurnacePros LA-309 может скачать бесплатное руководство по эксплуатации на нашем сайте. Этот полезный ресурс предоставляет подробное описание функций и инструкции по эксплуатации для вашего удобства. Получите свой экземпляр сейчас на manualshive.com и овладейте всеми возможностями вашей печи.

Поделиться
Скачать
background image

1

 This form factor utilizes a more efficient Active Power Factor Correction (APFC) power supply. Dell recommends only Universal Power Supplies (UPS) based on Sine Wave output for APFC PSUs, not an approximation 

of a Sine Wave, Square Wave, or quasi-Square Wave (see UPS technical specifications). If you have questions, please contact the manufacture to confirm the output type.

OptiPlex 780 Technical Specifications 

Processor

Options

Intel® Core™2 Quad (* not available on USFF);
Intel® Core™2 Duo;
Intel® Pentium® Dual Core;
Intel® Celeron® Dual Core;
Intel® Celeron®

Chipset

Intel® Q45 Express Chipset w/ICH10DO

Operating System 

Options

Microsoft® Windows 7® Basic; Microsoft® Windows 7® Home Premium; Microsoft® Windows 7® Professional; Microsoft® Windows 7® Ultimate 
Microsoft® Windows Vista® Home Basic; Microsoft® Windows Vista® Business ; Microsoft® Windows Vista® Ultimate; 
Microsoft® Windows® XP Professional Downgrade via Windows 7® Professional
Microsoft® Windows® XP Professional Downgrade via Windows 7® Ultimate
Microsoft® Windows Vista® Business Downgrade via Windows 7® Professional
Ubuntu® Linux®  (select countries); FreeDOS for N-series

Graphic Options

All chassis- Integrated Intel® Graphics Media Accelerator 4500*; 
MT/DT/SFF- DVI Adapter card; 256MB ATI® RADEON® HD 3450*; 256MB ATI RADEON HD 3470*; 256MB NVIDIA GeForce 9300 GE*; 512MB NVIDIA NVS420* 

Memory Options

MT/DT/SFF- Four DIMM slots; Non-ECC dual-channel 1066MHz DDR3 SDRAM*, up to 8GB* 
USFF- Two DIMM slots; Non-ECC dual-channel 1066MHz DDR3 SDRAM*  , up to 4GB* 

Networking 

MT/DT/SFF- Integrated Intel® 82567LM Ethernet LAN 10/100/1000; optional Broadcom® NetXtreme® 10/100/1000 PCIe card; optional Broadcom® 1505 PCIe WLAN card (802.11 Draft-N) 
USFF- Integrated Intel® 82567LM Ethernet LAN 10/100/1000; optional Broadcom® 1510 mini PCIe WLAN card (802.11 Draft-N)

Standard I/O Ports

MT/DT/SFF- 8 External USB 2.0 ports and 1 Internal USB 2.0; 1 Parallel; 1 Serial; 1 RJ-45; 1 VGA; 1 Display Port; 1 eSATA; 2 Line-in (stereo/microphone); 2 Line-out (headphone/speaker)
USFF- 7 External USB 2.0 ports; 1 Serial; 1 RJ-45; 1 VGA; 1 Display Port; 1 eSATA; 2 Line-in (stereo/microphone); 2 Line-out (headphone/speaker)

Hard Drive Options

MT/DT/SFF- 3.5” Hard Drives: up to 500GB* 7200 RPM SATA 3.0GB/s, up to 160GB* 10K RPM SATA 3.0GB/s
MT/DT/SFF- 2.5” Hard Drives: up to 250GB* 7200 RPM SATA 3.0GB/s, 160GB* SATA Full Disk Encryption, 64GB* SATA Solid State Drive
USFF- 2.5” Hard Drives: up to 320GB* 7200 RPM SATA 3.0GB/s Drives; 160GB* SATA Full Disk Encryption Drives; up to 128GB* SATA Solid State Drives
All chassis- Supports Dell’s Flexible Computing Solution diskless option
MT/DT/SFF- RAID 0 & 1 support on select configurations

Chassis Options

MINITOWER

DESKTOP

SMALL FORM FACTOR

ULTRA SMALL FORM FACTOR

Dimensions

(H x W x D)

Inches/(cm)

16.1 x 7.4 x 17.0 / 
(40.8 x 18.7 x 43.3)

4.5 x 15.7 x 13.9 /
(11.4 x 39.9 x 35.3)

3.65 x 12.4 x 13.4 /
(9.26 x 31.4 x 34.0) 

9.4” x 2.6” x 9.3” /
(23.9cm x 6.5cm x 23.6cm)

Weight (lbs/kg)

25.8 / 11.7

18.2 / 8.26

15.0  / 6.8

7.0lb / 3.2kg

Number of Bays

2 internal 3.5”
1 external 3.5”
2 external 5.25”

1 internal 3.5”
1 external 3.5”
1 external 5.25”

1 internal 3.5”
1 external 3.5” (slimline)
1 external 5.25” (slimline)

1 external SATA RMSD (slim)
1 SATA 2.5” internal HDD

Expansion Slots

1 full height PCIe x16
1 full height PCIe x1
2 full height PCI

1 low-profile PCIe x16
2 low-profile PCI
(Optional riser converts the PCIe
and PCI into full height slots)

1 low-profile PCIe x16
1 low-profile PCI

N/A

DIMM Slots

4

4

4

2

Power Supply Unit 

(PSU)

1

305W Standard PSU or  optional 255W 

88% Efficient PSU; Energy Star 5.0 

compliant, Active PFC

255W Standard PSU or optional 255W 

88% Efficient PSU; Energy Star 5.0 

compliant, Active PFC

235W Standard PSU or optional  235W 

88% Efficient PSU; Energy Star 5.0 

compliant, Active PFC

180W up to 90% Efficient Internal 

PSU, ENERGY STAR 5.0 compliant, 

Active PFC

Peripheral Options

Monitors:
Dell G-Series and Entry Standard and Widescreen Flat Panel Analog:

Dell G2210, G2410, E170S, E190S, E1709W, E1909WDD, E1910H, E1910, E2010H, E2009W, E2210H, E2210, E2310H 

Dell Professional Digital Standard and Widescreen Flat Panel:

Dell P170S, P190S, 1909W, 2009W, P2010H, P2210H, P2210, P2310H

Dell UltraSharp™ Digital Standard and Widescreen Flat Panel, Adjustable Stand:

Dell 1907FPV, 2007FP, 2209WA, U2410

All-in-One Stand with Display included:

19” Standard, 19” Wide and 22” Wide

Additional USFF Options:

Wall/ Under-desk mount, Stand only without Display 

Keyboards:

 Dell USB Entry Keyboard, Dell QuietKey™ Keyboard, Dell Multimedia Pro Keyboard, Dell Smartcard Keyboard

Mouse:

 Dell USB Optical Mouse, Dell Laser Mouse

Audio Speakers:

 Internal Dell Business audio speaker, Dell AX210 2.0 and AY410 2.1 Desktop Speakers; Dell AX510 and AX510PA Sound Bar Speakers 

 

Security Options

Trusted Platform Module (TPM) 1.2, Non-TPM (in select countries only), Dell ControlPoint, Chassis lock slot and lock loop  support, optional Chassis Intrusion Switch, Setup/BIOS Password, I/O Interface 

Security, Smart Card keyboards,  Intel® Trusted Execution Technology, BIOS support for optional Computrace®*

Systems Management 

Options

Intel® vPro Technology Enabled (iAMT Professional 5.x); 
Intel® vPro Technology Disabled (iAMT Professional 5.x); 
Intel® Standard Manageability;
No Out-of-Band Systems Management

Environmental and 

Regulatory Standards

Environmental Standards (eco-labels): 

(eco-labels): ENERGY STAR® 5.0 (select configurations), EPEAT Gold (select configurations), CECP, TCO 05, WEEE, Japan Energy Law, CES, Japan Green PC, FEMP, 

South Korea Eco-label, EU RoHS, China RoHS

Other Environmental Options: 

Dell Energy Smart settings (select configurations); Carbon Off-set; System Recycle (Asset Recovery Service)

Warranty and Service 

Options

Limited Hardware Warranty*; Standard 3-year Next Business Day On Site Service after Remote Diagnosis* (3-3-3); Optional 3-year Dell ProSupport™ for IT*; 4 year and 5 year extended warranty, service and 

support options

*Important Information:

System Memory and Graphics: S

ignificant system memory may be used to support graphics, depending on system

memory size and other factors.

4GB or Greater System Memory Capability: 

A 64-bit operating system is required to support 4GB or more of system memory.

Hard Drive: 

GB means 1 billion bytes and TB equals 1 trillion bytes; actual capacity varies with preloaded material and operating environment and will be less.

TPM: 

TPM is not available in all regions.

Next Business Day Onsite Service after Remote Diagnosis: 

Remote Diagnosis is determination by online/phone technician of cause of issue; may involve customer access to inside of system and multiple or extended sessions. If issue 

is covered by Limited Hardware Warranty (www.dell.com/warranty) and not resolved remotely, technician and/or part will be dispatched, usually within 1 business day following completion of Remote Diagnosis. Availability varies.  

Other conditions apply. 

Limited Hardware Warranty:  

For copy of Ltd Hardware Warranty, write Dell USA LP, Attn: Warranties, One Dell Way, Round Rock, TX 78682

or see www.dell.com/warranty.

Dell Services: 

Availability and terms of Dell Services vary by region. For more information,

visit www.dell.com/servicedescriptions.

Computrace:  

Not a Dell offer.  Certain conditions apply.  For full details, see terms and conditions at www.lojackforlaptops.com.

Содержание LA-309



























































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для LA-309

Lennox SIGNATURE SLP99UH070XV36B Unit Information preview
SIGNATURE SLP99UH070XV36B
Бренд: Lennox Страницы: 84
Ingersoll-Rand A951X040BD3SAB Installer'S Manual preview
A951X040BD3SAB
Бренд: Ingersoll-Rand Страницы: 104
Lennox 16L23 Installation Instructions Manual preview
16L23
Бренд: Lennox Страницы: 8
York TM9M Installation Manual preview
TM9M
Бренд: York Страницы: 44
Shelter Furnace SF1000 Instruction Manual preview
SF1000
Бренд: Shelter Furnace Страницы: 28
Payne PG95ESA Installation, Start-Up, Operating And Service And Maintenance Instructions preview
PG95ESA
Бренд: Payne Страницы: 86
VERDER CARBOLITE GERO 2416 Series Installation, Operation And Maintenance Instructions preview
CARBOLITE GERO 2416 Series
Бренд: VERDER Страницы: 52
Goodman ACVM960604CX Installation Instructions Manual preview
ACVM960604CX
Бренд: Goodman Страницы: 60
Carrier OBL098 Installation Instructions Manual preview
OBL098
Бренд: Carrier Страницы: 48
Nordica Candy Instructions For Installation, Use And Maintenance Manual preview
Candy
Бренд: Nordica Страницы: 52
ICP EF12F1900A Installation Instructions Manual preview
EF12F1900A
Бренд: ICP Страницы: 12
ICP NTC7/GNL Series Installation Instructions Manual preview
NTC7/GNL Series
Бренд: ICP Страницы: 22
Airxcel Suburban SF-20F Installation Instructions Manual preview
Suburban SF-20F
Бренд: Airxcel Страницы: 8
Airxcel Suburban SF-20FQ User'S Information Manual preview
Suburban SF-20FQ
Бренд: Airxcel Страницы: 8
SUPREME FEM15-E230V1M-A Manual preview
FEM15-E230V1M-A
Бренд: SUPREME Страницы: 38
Rheem R801T DF Series Manual preview
R801T DF Series
Бренд: Rheem Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды