Field
Description
Caution
For security reasons you cannot configure your device over
an interface that is configured for the Hotspot. Therefore
take care when selecting the interface you want to use for
the Hotspot.
If you select the interface over which the current configura-
tion session is running, the current connection will be lost.
You must then log in again over a reachable interface that
is not configured for the Hotspot to configure your device.
Domain at the HotSpot
Server
Enter the domain name that you used when setting up the Hot-
Spot server for this customer. The domain name is required so
that the Hotspot server can distinguish between the different cli-
ents (customers).
Walled Garden
Enable this function if you want to define a limited and free area
of websites (intranet).
The function is not activated by default.
Walled Network
/
Net-
mask
Only if
Walled Garden
is enabled.
Enter the network address of the
Walled Network
, the corres-
ponding
Netmask
of the intranet server.
For the address range resulting from
Walled NetworkNetmask
,
clients require no authentication.
Example: Enter 192.168.0.0 / 255.255.255.0, if all IP addresses
from 192.168.0.0 to 19.168.0.255 are free. Enter 192.168.0.1 /
255.255.255.255, if only the IP address 192.168.0.1 is free.
Walled Garden URL
Only if
Walled Garden
is enabled.
Enter the
Walled Garden URL
of the intranet server. Freely ac-
cessible websites must be reachable over this address.
Terms &Conditions
Only if
Walled Garden
is enabled.
In the
Terms &Conditions
input field, enter the address of the
general terms and conditions on the intranet server, or public
server, e.g., http://www.webserver.de/agb.htm. The page must
Funkwerk Enterprise Communications GmbH
21 Local Services
R1xxx/R3xxx/R4xxx
391
