A number of separate rule chains can be created. The same filter can also be used in dif-
ferent rule chains.
You can also assign a rule chain individually to each interface.
Caution
Make sure you don’t lock yourself out when configuring filters.
If possible, access your gateway for filter configuration over the serial console interface
or ISDN Login.
14.5.1 Access Filter
This menu is for configuration of access filter. Each filter describes a certain part of the IP
traffic and defines, for example, the IP addresses, the protocol, the source port or the des-
tination port.
A list of all access filters is displayed in the
Networking
->
Access Rules
->
Access Filter
menu.
14.5.1.1 Edit or New
Choose the
icon to edit existing entries. To configure access fiters, select the
New
but-
ton.
The
Networking
->
Access Rules
->
Access Filter
->
New
menu includes the following fields:
Fields in the Access FilterBasic Parameters menu
Field
Description
Description
Enter a description for the filter.
Service
Select one of the preconfigured services. The extensive range
of services configured ex works includes the following:
•
%)
•
,,/!F
•
•
%$
•
%/&H
Funkwerk Enterprise Communications GmbH
14 Networking
R1xxx/R3xxx/R4xxx
207
