Funkwerk Bintec R1200wu, Справочник

Страница: 235 / 518

Field Description
Possible values:
•
1)
(default value)
•
8&
: Enter the IP address of the host.
•
*
: Enter the network address and the related net-
mask.
Destination Port/Range
Only if
Protocol
=
%,
,
,
Enter the destination port number or range of destination port
numbers that matches the filter.
Possible values:
•
!1//!
(default value): The route is valid for all port numbers
•
-,% ) ,
: Enables the entry of a port number.
•
-,% ) , $
: Enables the entry of a range of port
numbers.
Source IP Address/
Netmask
Enter the source IP address and netmask of the data packets.
Source Port/Range
Only if
Protocol
=
%,
,
,
Enter the source port number or range of source port numbers.
Possible values:
•
!1//!
(default value): The route is valid for all port numbers
•
-,% ) ,
: Enables the entry of a port number.
•
-,% ) , $
: Enables the entry of a range of port
numbers.
DSCP/TOS Filter
(Layer 3)
Select the Type of Service (TOS).
Possible values:
•
$
(default value): The type of service is ignored.
•
3-6 <) ;/
: Differentiated Services Code Point
according to RFC 3260 is used to signal the priority of IP
packets (indicated in binary format, 6 bit).
•
3-6 3%/ ;/
: Differentiated Services Code Point
according to RFC 3260 is used to signal the priority of IP
Funkwerk Enterprise Communications GmbH
14 Networking
R1xxx/R3xxx/R4xxx 209