Funkwerk Bintec R1200wu, Справочник

Страница: 289 / 518

Field Description
The function is disabled by default.
LCP Alive Check
Check whether the reachability of the remote terminal is to be
checked by sending LCP echo requests or replies. This makes
it possible to switch to a backup connection more quickly in the
event of line faults.
The function is enabled with
#/
.
The function is disabled by default.
Callback Mode
Select the Callback Mode function.
Possible values:
•
*
(default value): Your device does not call back.
•
1%
: Select one of the following options:
•
* $
: Your device calls the connection
partner to request a callback.
•
0& 6/ (
: Your device calls the connection
partner to request a callback via CBCP (Callback Control
Protocol). Needed for Windows clients.
•
&&
: Select one of the following options:
•
*$ 643
: Your device calls back im-
mediately when requested to do so by the connection part-
ner.
•
0& - (
: Your device calls back after a
period of time proposed by the Microsoft client (NT: 10
seconds, new systems: 12 seconds. It uses the call number
(
Entries
->
Number
) with the
Mode @$$
or
<
,
entered for the connection partner. If no number is entered,
the required number can be reported by the caller in a PPP
negotiation. This setting should be avoided where possible
for security reasons. Currently cannot be avoided for the
connection of mobile Microsoft clients via DCN.
•
3/)E 643 /)
: Your device calls back after ap-
prox. four seconds if your device is requested to do so by
the connection partner. Only makes sense for CLID.
•
0& - (E 6//#% ,/
: Like
0& - (
with the option of termination.
This setting should be avoided for security reasons. The Mi-
Funkwerk Enterprise Communications GmbH
17 WAN
R1xxx/R3xxx/R4xxx 263