Funkwerk Bintec R1200wu, Справочник

Страница: 280 / 518

Field Description
Default Route
Only if
IP Address Mode
=
-%
and
1&&
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
#/
.
The function is disabled by default.
Create NAT Policy Only if IP Address Mode =
-%
and
1&&
When you configure an ISDN Internet connection, specify
whether Network Address Translation (NAT) is to be activated.
The function is enabled with
#/
.
The function is disabled by default.
Local IP Address
Only if
IP Address Mode
=
-%
Assign the IP address from your LAN to the ISDN interface
which is to be used as your device's internal source address.
Route Entries Only if IP Address Mode =
-%
Define other routing entries for this connection partner.
•
= 1&&
: IP address of the destination host or
network.
•
*&
: Netmask for
Remote IP Address
. If no entry is
made, your device uses a default netmask.
•
(%
: The lower the value, the higher the priority of the
route (possible values ... ). The default value is .
IP Assignment Pool
Only if IP Address Mode =
1&&
Select IP pools configured in the WAN -> In Dialup -> IP
Pools
menu. If an IP pool has not been configured here yet, the
message
* )
appears in this field.
The menu
Advanced Settings
consists of the following fields:
17 WAN Funkwerk Enterprise Communications GmbH
254 R1xxx/R3xxx/R4xxx