Field
Value
(dialup connection), this can cause additional costs if the server
is
for a long time.
The function is activated by selecting
#/
.
The function is enabled by default.
Retries
Enter the number of retries for cases when there is no response
to a request. If an response has still not been received after
these attempts, the
Status
is set to
. In
Alive Check
=
#/
your device attempts to reach the server every 20
seconds. If the server responds,
Status
is set back to
/
.
Possible values are whole numbers between
and
.
The default value is
. To prevent
Status
being set to
, set
this value to
.
RADIUS Dialout
Only for
Authentication Type
=
1%
and
-% 1%
.
Select whether your device receives requests from RADIUS
server dialout routes. This enables temporary interfaces to be
configured automatically and your device can initiate outgoing
connections that are not configured permanently.
The function is activated by selecting
#/
.
The function is disabled by default.
If the function is active, you can enter the following options:
•
=/ /
: Enter the time period in seconds
between update intervals.
The default entry here is
i.e. an automatic reload is not car-
ried out.
•
3 / 5& &&
: Some Radius servers require a
user password for each RADIUS request. Enter the password
that your device sends as the default user password in the
prompt for the dialout routes on the RADIUS server.
By default,
3 / 5& &&
is empty.
Funkwerk Enterprise Communications GmbH
10 System Management
R1xxx/R3xxx/R4xxx
109
