FULTON VSRT Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 72 / 118

© Fulton Group N.A., 2022
OPERATION
VSRT-IOM-2022-0728
SECTION 3
3-8
O f f U P r
Hold until Ser is displayed, and release
S E r
(Momentarily displayed)
9 5 4 : 0
1st parameter shown is flame signal
(parameter 954)
7 0 1 :0 1: 6 2 + until parameter 701 is displayed
(701 is the most recent fault, 725 is the oldest)
7 0 1 :0 1: 6 2
Each fault has "indexes" for more information
In this example, "62" is the Error code
7 0 1: 0 1 : 6 2
Hold Return, until index "01" flashes,
and release
7 0 1: 02 : 0
+ to display parameter 701, index "02"
In this example "0" is the Diagnostic code
7 0 1: 03 : 0
+ to display parameter 701, index "03"
In this example "0" is the Class (UK use ONLY)
7 0 1: 04 : 10
+ to display parameter 701, index "04"
In this example "10" is the Phase
7 0 1: 05 : 22
+ to display parameter 701, index "05"
In this example "22" is the Startup number
7 0 1: 06 : ._._
+ to display parameter 701, index "06"
In this example "._._"indicates no Load (firing rate)
Fault History
Key: Red indicates "Flashing"
7 0 1: 07 : 0 + to display parameter 701, index "07"
In this example "0" is the Fuel (Fuel 0, or Fuel 1)
- E n d -
+ at this point displays - End - ,
to indicate that there are no more "indexes"
7 0 1 :0 1: 6 2
Esc to go back to parameter 701:01
7 0 2 :0 1: 8 7
+ to display parameter 702
7 0 2: 0 1 : 8 7
Hold Return, until index "01" flashes,
and release
7 0 2: 0 2 : 1
+ to display parameter 702, index "02"
In this example "1" is the Diagnostic code