Fujitsu Primergy RX100 S3 Скачать руководство пользователя страница 40

Страница: 40 / 287

Chapter 2 Checking before OS Installation

2.1 Preparation on the Server

Before starting installation, install internal options to the server and perform

necessary hardware settings.

2.1.1 Installing Internal Options

Internal options are classified into those that must be installed before the OS installation and those that

must be installed after the OS installation.

For installation procedures, refer to "Chapter 7 Installing Internal Options" (

pg.175).

●

Options That Must be Installed before the OS Installation

• Memory modules

• Expansion cards

• USB floppy disk drive

ServerStart floppy disk or driver disk is used to install the OS. Connect the USB floppy disk drive in

advance.

●

Options That Must be Installed after the OS Installation

• Optional SCSI devices

• Internal hard disk units where the OS is not installed

If an internal option device that must be installed after the OS installation has been already installed,

remove the device, install the OS, then reinstall the device.

■

Installing Optional External Devices

When installing USB devices, turn off their power or unplug their connection cables from the server

during the OS installation. Connect them after the OS installation.

■

Cautions for Installing an Expansion Card

When using an expansion card, read the notes on the expansion card.

Содержание Primergy RX100 S3
































































































































































































































































































Результаты поиска

Содержание Primergy RX100 S3

Отзывы:

Бренды по названию

Популярные бренды

Fujitsu Primergy RX100 S3, Руководство пользователя

Результаты поиска

Содержание Primergy RX100 S3

Отзывы:

Бренды по названию

Популярные бренды