Fujitsu Primergy RX100 S3, Руководство пользователя

Страница: 146 / 287

146
Chapter 5 Operations after OS Installation
5.3.1 Storing the BIOS Information
Store the BIOS information according to the following procedures.
Before starting the operation, if the "OS Boot Monitoring" function of ServerView is enabled, disable it
(it is disabled by default).
If you start the system with the "OS Boot Monitoring" function enabled, the server operation may
become unpredictable, i.e., an abrupt power interruption or unintended restart may occur.
If it is necessary to operate the server with the "OS Boot Monitoring" function enabled, enable the
function after storing the BIOS information.
For details of ServerView, refer to "ServerView User’s Guide".
1
Turn on the server and insert the "Server Management Tools" disk into the
floppy disk drive.
The window for selecting a keyboard appears.
2
Select a keyboard.
Select [1] for Japanese keyboard or select [2] for English keyboard. Japanese keyboard is
selected by default.
3
When the DOS prompt window appears, enter the following command and
press the [Enter] key.
A:\ SMT\>biossave.bat
If storing has already been performed with Server Management Tools, the stored file must exist
in the floppy disk. In this case, overwriting the file may lead to incompletion of BIOS information
recovery. Move the file to another floppy disk, rename the file or delete it by executing the fol-
lowing command.
A:\SMT\>deldat.bat [Enter]
4
If the BIOS information is stored correctly, the following message appears.
5
Confirm that the stored information files are created.
Enter the following command to confirm that "*.SCS" (file names vary depending on BIOS
version), "FSCSMCTR.DAT", "BIOSCMP.TXT", "LAN_CFG.DAT", and "MUX_CONF.DAT"
are created.
A:\SMT>dir
The BIOS information has been stored. The server can now be turned off safely.
Please select:
1 = JP Keyboard
2 = US Keyboard
Your selection
NORMAL END