Fujitsu Primergy RX100 S3, Руководство пользователя

Страница: 149 / 287

149
PRIMERGY RX100 S3 User’s Guide
5
Operatio
ns
after O
S
In
st
al
lation
■ Starting ServerStart
●
For Creation on a Client Computer
When the CD has been copied
1
Click [Start]
→
[Programs]
→
[Fujitsu ServerStart]
→
[ServerStart].
ServerStart starts up and the [Welcome to ServerStart] window appears.
When the CD has not been copied
1
Insert the ServerStart Disc 1 CD-ROM into the client computer's CD-ROM
drive.
ServerStart starts up and the [Welcome to ServerStart] window appears.
●
For Creation on the Server
Please confirm the floppy disk drive of the USB connection has been connected before turning on the
power supply of the Server.
1
Turn on the server and insert the ServerStart Disc 1 CD-ROM immediately after
that.
ServerStart starts up and a message prompts you to insert the ServerStart floppy disk.
2
Insert the attached "ServerStart floppy disk" into the server's floppy disk drive.
Then make sure "Removable media" and "A:" are selected and click [Create].
A network setup window for remote installation appears.
If a configuration file already exists in the ServerStart floppy disk and [OK] is clicked without
clicking [Create], the [ServerStart Unattended Mode] window appears. Make sure to click
[Exit]. The [Welcome to ServerStart] window appears.
If [Start] is clicked in the [ServerStart Unattended Mode] window, the installation of the server
will start and all disk contents will be deleted.