Fujitsu Primergy RX100 S3, Руководство пользователя

Страница: 141 / 287

141
PRIMERGY RX100 S3 User’s Guide
5
Operatio
ns
after O
S
In
st
al
lation
Minimum information is recorded to the memory dump file.
Each time a fatal error occurs, a new file is created in the directory specified in [Small
dump directory].
2. In [Dump File] or [Small dump directory], specify the directory to save the memory
dump file, with its full path.
In case of kernel memory dump or complete memory dump, if [Overwrite any existing file]
is checked, debugging information is overwritten to the specified file every time.
7
Click [OK] to close the [Startup and Recovery] window.
8
Click [OK] to close the [System Properties] window.
9
Restart the system.
The setting is enabled after the system is restarted.
■
Paging File Setting
Set up the paging file according to the following procedures:
1
Log on to the server with administrator privileges.
2
Check free space of the drive where the system is installed.
Check the required amount of free space according to "
■
Checking Hard Disk Free Space"
( pg.139). If the drive has no free space, refer to "
■
Cannot Collect the Memory Dump"
( pg.250).
3
Click [Start]
→
[Settings]
→
[Control Panel].
4
Double-click the [System] icon.
The [System Properties] window appears.
5
Click the [Advanced] tab and click [Performance Options].
The [Performance Options] window appears.