Fujitsu Primergy RX100 S3, Руководство пользователя

Страница: 23 / 287

23
PRIMERGY RX100 S3 User’s Guide
1
Overview
1.3 Component Names and Functions
This section explains the component names and functions of the server.
1.3.1 Server (Front View)
a Internal CD-ROM drive unit (optional)
Reads data or programs from a CD-ROM.
b 3.5-inch storage bay
Contains an internal hard disk unit. This server can have up to two internal hard disk units.
c USB connector ( )
Connects peripheral equipment conforming to the USB standard (2.0 or 1.1).
d Reset switch ( )
Pressing this switch resets and restarts the system.
Do not reset when the hard disk access LED is lit. Data in the hard disk may be damaged.
e System identification LED button ( )
When pressing this button, the front and rear system identification LEDs are lit blue so that the
locations of devices being maintained can be determined.
f Power switch ( )
Do not turn the server off when the hard disk access display LED is blinking.
Data in the hard disk may be damaged.
g Maintenance switch ( )
This switch is used only by maintenance personnel. Do not touch this.
h System identification LED ( )
This LED is used for maintenance. When pressing this button, the front and rear system
identification LEDs are lit blue so that the locations of devices being maintained can be
determined. Also, the [System Identification LED Display] button of ServerView can be used to
light them.
a d b e
h
f g
i
j
k
c
RST
ID
NMI
ID