2 Componet Names and Functions
55
E
2
Componet Names and Func-
tions
This chapter explains the component names and functions of this product.
2.1
Eject Button and LED
Eject button
Press this button to eject the cartridge from the drive.
"3.1 Data Cartridges That can be Used"(pg.59)
When the device is running (when the ACTIVITY LED blinks and when loading/unloading or
writing/reading data), do not press the eject button. Wait until the operation finishes before pressing
the eject button.
LED
There are 4 LEDs as shown below, indicating self-diagnostic test when the power is on, and status
and error during operation.
The general meaning of each LED status is as follows. For details, refer to the list on (pg.56).
• READY LED
When this is on, it indicates that a cartridge is loaded.
• ACTIVITY LED
This blinks mainly when a cartridge is operating.
Eject button
LED
READY LED
ACTIVITY LED
CLEAN LED
FAULT LED
(Green)
(Green)
(Amber)
(Amber)
