58
How to eject
Check that only the READY LED is on, and press the eject button.
Put the ejected data cartridge in the cartridge case to store.
`
Eject the data cartridge when the drive is not operating the tape (when the ACTIVITY LED is
turned off).
`
Depending on the backup software, the cartridge cannot be ejected using the eject button
(NetVault, etc.). In this case, pressing the eject button does not eject the cartridge. Eject the
cartridge by operating the backup software.
`
When the server is turned off, the data cartridge cannot be inserted or ejected.
`
When ejecting the data cartridge, do not stop or push it back. Also, do not pull out the
data cartridge before it is fully ejected. Doing so may cause device failure.
