1 Installing the Unit to a Server
53
E
For Windows 2000 Server
1
Install this product to FT1.
2
Turn on the power of FT1 and FT2, and start the CoServer in online
mode.
3
Log on to the CoServer1 with administrator privileges.
4
Click the [Start] button
→
[Settings]
→
[Control Panel] in this
order.
5
Double click the [System] icon.
6
Click [Device Manager].
The device manager starts.
7
Double click [Other devices], and then double click [TANDBERG
TS400 SCSI Sequential Device].
8
Select the [Driver] tab and click [Update Driver].
The "Welcome to the Device Driver Upgrade Wizard" message appears.
9
Click [Next].
Follow the wizard for installation.
10
For search methods, select [Find the best driver for the device],
and click [Next].
11
For search location, select [Specify the location] only, and click
[Next].
12
When [File copy source of manufacturer] is requested, specify the
folder which restored the driver.
• When restored in the floppy disk drive A
A:\lto2\i386
• When restored in Temp folder of the drive C
C:\Temp\Ito2\i386
• When using CD-ROM
[CD-ROM drive]:\DRIVERS\tape\lto2\i386
13
Click [OK].
The "Completing the Device Driver Upgrade Wizard" message appears.
14
Click [Next].
The "Completing the Hardware Update Wizard" message appears.
