58
Rev. 8.0
A26361-K863-Z102-8-7619
Switch Blade firmware
Updating BX300 Components
Ê
Specify the desired switch blade.
The Command Line Interface (CLI) session starts.
Press <Ctrl-Q> Return Console Menu
Ê
Press the
Enter
-Key to switch to the command mode.
The command mode is indicated by the prompt:
Console#
.
Press <Ctrl+Q> Return Console Menu
Console#
config
Console(config)#
interface vlan 1
Console(config-if)#
ip address 10.50.50.51 255.0.0.0
Console(config-if)#
exit
Console(config)#
exit
Console#
show ip interface
TP address and netmask: 10.50.50.51 255.0.0.0 on VLAN 1,
and address mode: User specified
Ê
Enter the commands above.
I
Please mind, that the entries for IP-address and subnetmask are
merely examples and probably will differ from your system.
Ê
Press
[CTRL]
+
[Q]
to return to the console menu.
Ê
You may check the newly established LAN connection by pinging the switch
blade on the client machine.
Ê
Install and run your TFTP server software.
Ê
Download the TFTP update package
BX300_TFTP-IMAGES_<version>.exe
from the Fujitsu Siemens Download Server
http://download.fujitsu-
siemens.com
.
Ê
Extract the desired firmware file (*.
bix
) to the TFTP file system root
directory. For information on image file names see the readme file of the
TFTP update package.
Содержание PRIMERGY BX300
