Fujitsu PRIMERGY BX300, Руководство по эксплуатации

Страница: 30 / 163

20 Rev. 8.0
A26361-K863-Z102-8-7619
Notes On Installing Into the Rack Important Notes
3.5 Notes On Installing Into the Rack
V
CAUTION!
●
For safety reasons, at least two people are required to install the
server because of its weight and size.
●
For safety reasons only one unit may be withdrawn from the rack at a
time when performing assembly or service work.
●
Never lift the server into the rack using the handles on the front panel.
●
Ensure that the anti-tilt bracket is correctly mounted when you set up the
rack.
●
If more than one unit is withdrawn from the rack at any one time, the rack is
in danger of tilting forward.
●
When connecting and disconnecting cables, observe the relevant notes in
the chapter “Important notes” in the technical manual for the corresponding
rack. The technical manual is supplied with the corresponding rack.
●
The power connection for the rack must be installed by an authorized
technician (electrician).
V
CAUTION!
If the server is integrated in a (rack) installation that receives power
from an industrial (public) power supply network with the IEC309
connector, the (public) power supply protection must comply with the
requirements for the non-industrial (public) power supply networks for
the type A connector.
3.6 Transporting the Server
V
CAUTION!
Transport the server only in its original packaging or in a packaging which
protects it from knocks and jolts. Do not unpack the server until you have
finished transporting it.
If you need to lift or transport the server, ask a second person to
help you.
Never lift or transport the server using the handles on the front
panel.