Fujitsu fi-8150, Руководство оператора

Страница: 167 / 434

Setting Item Description Parameter(*1)/Value Factory Default
(*2)
- : No parameters/values
[Enable] is selected for [Vertical Streak
Detection].
Adjust the sensitivity level according to
how dirty the glass is.
The vertical streak detection setting can
also be configured in the scanner driver or
on the Software Operation Panel.
Note that priority is given to the scanner
driver setting.
Sensitivity can also be configured from the
Software Operation Panel.
20:Prioritize
panel settings For the paper protection setting, prioritize
the operator panel setting over the
Software Operation Panel setting.
You cannot prioritize the setting over the
scanner driver setting.
When [1:Paper Protection] is selected, the
Paper Protection setting of the operator
panel is prioritized.
When [2:Clear] is selected, the Paper
Protection setting is no longer prioritized. 1:Paper Protection
2:Clear 2:Clear
21:Ope. Panel
Initialization Initialize the settings of the operator
panel,
except for the language setting and any
items without a factory default setting. 1:Yes
2:No (*4)
22:Power
saving Specify the waiting time before the
scanner enters power saving mode.
It can also be configured in the Software
Operation Panel. 5 to 115 (in increments of
5) (minutes) 15
23:Power-off
time Specify a time for the scanner to turn off
automatically.
It can also be configured in the Software
Operation Panel. Disable, 1, 2, 4, 8 (hours) 4
24:Pre-pick Enable this to shorten the scanning time
when scanning continuously.
"Pre-pick" refers to feeding the next
document into the ADF before ejecting the
current document being scanned when
scanning documents continuously. 1:Yes
2:No 1:Yes
How to Use the Operator Panel [fi-8190/fi-8290/fi-8170/fi-8270]
167