Chapter 2 System Status
2.9 Firmware Maintenance
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED
P2X0-1260-19ENZ0
62
2.9
Firmware Maintenance
This function performs the maintenance operation for the firmware that is managed in the ETERNUS DX/AF.
Firmware maintenance is performed to update the firmware version. The firmware can be applied after being
registered in the Bootup and Utility Device (BUD) of the CM.
The following items are displayed in the Main area:
•
Current Firmware Version
The current controller firmware version is displayed.
-
VxxLyy-zzzz (Vxx: Version, Lyy: Level, zzzz: Release number)
•
Firmware Version after Restart
The controller firmware version after the next power on is displayed.
•
When the application schedule for the controller firmware is being reserved, the [Apply Controller
Firmware] function is not displayed in [Action]. The [Apply Controller Firmware] function is automatically
started with the date and time that are displayed in the information field according to the application
mode that is used.
•
When the application mode is "Update & Reboot", the ETERNUS DX/AF is automatically rebooted after the
controller firmware is applied.
•
If an application schedule for the controller firmware is not reserved, the [Delete Controller Firmware
Schedule] function is not displayed in [Action].
•
If the message which indicates that the controller firmware application has been reserved disappears
before the reserved date, the reservation may be canceled automatically. In this case, reserve the appli-
cation schedule for the controller firmware again. Refer to "Apply Controller Firmware" in "ETERNUS Web
GUI User’s Guide (Settings)" for details.
Содержание ETERNUS AF250
Страница 2: ...This page is intentionally left blank ...
Страница 423: ......