Fujitsu ETERNUS AF250, Руководство пользователя

Страница: 296 / 423

Chapter 5 Connectivity Status
5.8 NAS
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
296
• Redundant Port
The location information of the pair port, which configure multipath setting with the target port, is
displayed.
If the redundant port is not specified, a "-" (hyphen) is displayed.
• Failover Status
The failover status of the multipath is displayed.
A "-" (hyphen) is displayed when the multipath is not set (or when "Redundancy" is "Single").
- Normal
The multipath setting between the "Port" and "Redundant Port" is in a normal state.
- CM#x CA#y Port#z is currently inactive
The multipath between the "Port" and "Redundant Port" is set, but the "CM#x CA#y Port#z" port is not
used.
• Redundancy
The connection type of the target port is displayed.
When the connection type is "Active-Active" or "Active-Standby", the "Redundant Port" information is
displayed.
- Active-Active
Combine the ports in both of the CMs and configure the redundant ports. For this configuration, the
ports of both CMs can be used at any time.
- Active - Standby
Combine the ports in both of the CMs and configure the redundant ports. For this configuration, one
port remains in standby status.
- Single
Use only for the ports in the CM that are not redundant.
5.8.2 Environment Settings
This function displays the setup information of the servers (NAS servers, DNS servers, and authentication
servers) and the local user authentication that is used for the NAS system.
This function is displayed in a Unified Storage environment.
• The local user authentication cannot be used when an Active Directory authentication server or an LDAP
authentication server is used. In this case, the setting item names are displayed in the [Local User] tab
and the [Local Group] tab, but all contents are blank.
• If the local user authentication is used, an Active Directory authentication server and an LDAP
authentication server cannot be used. In this case, the setting item names are displayed for the Active
Directory authentication server and the LDAP authentication server, but all contents are blank.