Fujitsu ETERNUS AF250, Руководство пользователя

Страница: 41 / 423

Chapter 2 System Status
2.2 Network
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
41
2.2 Network
This function displays the network environment of each port in the ETERNUS DX/AF.
■
IPv4 Settings
The network setting information is displayed.
The Simple Network Management Protocol (SNMP) Information and the E-Mail Information are displayed
under the network setting information.
The following items are displayed in the Main area:
• Port
The port type is displayed.
- For the ETERNUS DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250, and the ETERNUS DX200F
MNT and RMT
- For the ETERNUS DX500 S3/DX600 S3, the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3, and the
ETERNUS AF650
MNT, RMT, and FST
• If the message "Currently Network Configuration is set to factory default." is displayed in the system
message field, the network environment settings for the MNT port must be performed. Perform the
[Setup Network Environment] function in [Action]. Some functions are not available if the network
environment settings are incomplete. Refer to "Setup Network Environment" in "ETERNUS Web GUI User’s
Guide (Settings)" for details.
• Click the [ ] icon to display the latest screen. Note that after changing the firewall setting and returning
to this screen, it takes approximately 10 seconds to update the display contents. Wait at least 10 seconds
and click the [
] icon or click [Network] in the category to display the [Network] screen again.