manualshive.com logo in svg

Fujitsu ESPRIMO E5635, Руководство по эксплуатации

Поделиться
Скачать
Fujitsu ESPRIMO E5635 Скачать руководство пользователя страница 51

 System 

expansions 

Fujitsu Technology Solutions  

43 

Installing and removing a board 

!

 

Please take note of the section "Information about boards". 

 

There is a corresponding rear panel for both low-profile boards and long boards. 
The number, position and arrangement of the board slots on the mainboard can be found in the 
manual for the mainboard. Boards may already be installed when the device is shipped. 
You can fix boards in two ways: 

●

 

with the lock (low-profile boards only) 

●

 

with the bracket 

Installing board in low-profile slot 

►

 

Open the casing (see "Opening the casing"). 

 

3

2

1

5

4

 

►

 

Press on the locking lever in the direction of the arrow (1), unhook it and swing it up in the 
direction of the arrow (2). 

►

 

Remove the rear slot cover plate from the slot (3). 

 

!

 

Do not dispose of the cover plate. For cooling, protection against fire and in order to 
comply with EMC regulations, you must refit the cover plate if you remove the board. 

 

►

 

Make the required settings for the board. 

►

 

Push the board up to its slot (4) as far as the stop. 

►

 

Press the board into the slot so that it engages. 

►

 

Fold the lock closed in the direction of the arrow (5) and allow it to engage. 

►

 

If necessary, connect the cables. 

►

 

Close the casing (see "Closing the casing"). 

 

i

 

If you have installed or removed a PCI board, please check the relevant PCI slot settings 
in the 

BIOS Setup

. If necessary, change the settings. Further information is provided in the 

PCI board documentation.  

Содержание ESPRIMO E5635



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды