Fujitsu DESKPOWER 2000 FPC-M80000, Руководство пользователя, Страница: 74 / 79

64
5 Other Precautions
■
Disposal
Disposal of LCD
The fluorescent tube in the LCD contains mercury. When disposing of the PC, follow your local
environmental rules and regulations.
Disposal of battery
Since batteries are used in the wireless keyboard and mouse, an explosion may occur if the PC is
thrown into a fire. When disposing of an old battery, follow your local environmental rules and
regulations.
Responsibility to issue manifest report
If this product is owned by an organization for business use, a manifest report (waste control report)
must be issued when disposing of the PC.
Note that a manifest report need not be issued when this product is owned by a user for personal
use.
For how to dispose of the PC, follow your local rules and regulations relating to waste control.
■
USB (Windows 98/2000/Me model)
“USB” stands for “Universal Serial Bus”, which standardizes mouse, keyboard, printer, modem,
and speaker interfaces.
Point
- Some USB-compliant peripheral devices require a special device driver to be installed.
- USB is supported by Windows 98, 2000 and Me.
- Depending on the type of a connected USB device, Windows may not be closed properly. In
this case, remove the device and close Windows.
■
USB keyboard (Windows 98/Me model)
●
After selecting [Control Panel]-[Accessibility Options]-[FilterKeys]-[Settings] and enabling [Use
Shortcut], the shortcut key function is disabled and [Use FilterKeys] is not set even after the [Right
Shift] key has been pressed for 8 or more seconds.
In this case, use the mouse to set the [Use FilterKeys] checkbox.
●
In the MS-DOS mode, entering too many characters from the USB keyboard may halt the system.
●
Do not connect or disconnect the USB keyboard connector during the PC is being operated.
Otherwise, the system may stop its response. In this case, press the power switch for more than
4 seconds, turn the power off, and turn the power on again after waiting for more than 10 seconds.
●
To start the system in the Safe mode, change the following setting on BIOS Setup:
• [Advanced]-[Advanced System Configuration]-[USB Legacy Support]: Enabled
After exiting from the Safe mode, reset as follows to resume the system:
• [Advanced]-[Advanced System Configuration]-[USB Legacy Support]: Disabled
08Panac(55-71) 01/11/2000, 09:23 64