Fujitsu DESKPOWER 2000 FPC-M80000, Руководство пользователя, Страница: 13 / 79

3
1 Busy lamp
This lamp lights up while data is read from the CD-ROM drive or a music CD is played.
2 Headphone volume (only for music CDs)
Use this control to adjust the volume of headphones.
3 Headphone jack (only for music CDs)
When listening to a music CD with headphones, plug them to this jack.
4 Floppy disk drive
This drive accommodates a floppy disk for writing and reading data.
5 Floppy disk access lamp
This lamp lights up while the floppy disk is accessed.
6 Floppy disk eject button
Press this button to remove a floppy disk from the floppy disk drive.
Do not press this button when the floppy disk access lamp is on.
7 Ventholes (on the side panel and the bottom of the front panel)
These ventholes take air in for cooling inside.
8 CD-ROM drive
Insert a CD-ROM into this drive to read data or programs, or insert a music CD for playback.
9 Front access bay
Attach front access bay options such as internal hard disk and MO (magneto-optical) disk to this
bay.
10 Eject button
Press this button to insert or remove a CD-ROM or music CD. This button can be used when the
PC is on. Do not press this button when the Busy lamp is on.
11 Hard disk access lamp
This lamp lights up while the hard disk is accessed.
12 Power lamp
This lamp lights up in green when the PC is on.
It lights up in green when the PC is in operation. In the standby (power-saving) mode, it lights up in
green (Windows NT) or turns off (Windows 98/2000/Me).
13 Power switch
Press this switch to turn on the PC or set the system to the standby (power-saving) mode.
14 Sleep lamp
This lamp lights up in orange in the standby (power-saving) mode.
03Panac(01-13) 01/11/2000, 09:22 3