
47
■
Installing a device in the 5-inch front access bay
Install a front access bay option such as internal hard disk and CD-ROM drive as follows:
Point
- A SCSI card is required to be installed before installing an internal SCSI option.
- A SCSI ID must be set for an internal SCSI option to be installed. Refer to the related manual
and set a unique ID.
- Before installing an internal IDE option, set it to the master, slave or cable select.
1
Remove the cover and front panel.
2
Remove the blank panel from the front panel.
Remove two screws from both edges of the blank panel.
The blank panel need not be removed when installing an internal hard disk.
Point
- When installing a magneto-optical disk drive, fix the attached front access bay panel to the front
panel using the screws.
6 Installing Other Devices
06Panac(38-50)
01/11/2000, 09:23
47
Содержание DESKPOWER 2000 FPC-M80000
