Fujitsu AIRSTAGE J-IIIL, Дизайн и техническое руководство

Страница: 823 / 904

4-3. Central remote controller (UTY-DCGYZ1)
External input and output functions and related components are as follows:
External input External output Input select Connector
External connect kit
(Optional parts)
Control input —
Dry contact CN12, CN13 UTY-XWZXZ7
Apply voltage CN14, CN15 UTY-XWZXZ8
—
Operation status
— CN18 UTY-XWZXZA
Error status
RELATED LINKS
"External input" on page 08-69
"External output" on page 08-73
"Optional parts" on page 08-74
"Function summary of controller external input/output" on page 08-75
¢
External input
This function performs “Emergency stop” or “All On / All Off” by using the signal to be input externally
at external input terminals.

Input select
Use either one of Apply voltage terminal or Dry contact terminal according to the application. (Both
types of terminals cannot be used simultaneously.)
• CN12 (CH1) and CN13 (CH2): Dry contact terminal
When a power supply is unnecessary at the input device you want to connect, use the Dry contact
terminal CN12 (Ch1) and CN13 (Ch2).
PCB
CN13 (Ch2, Black) CN12 (Ch1, White)
*
Connected unit
*: Short circuit detection resistance (R
ON
): ≤ 500 Ω
Open circuit detection resistance (R
OFF
): ≥ 100 kΩ
A twisted pair cable 22 AWG (0.33 mm
2
) should be used. (Maximum cable length: 82 ft [25 m])
Input method Terminal Input signal Operation
Edge CN12 (Ch1)
Low → High
“Emergency Stop”
or “All on”
High → Low
“Emergency Stop” reset
or “All Off”
Pulse
CN12 (Ch1) Low → High
“Emergency Stop”
or “All on”
CN13 (Ch2) Low → High
“Emergency Stop” reset
or “All Off”
4-3. Central remote controller (UTY-DCGYZ1)
- (08-69) -
4. Controller
EXTERNAL INPUT AND OUTPUT EXTERNAL INPUT AND OUTPUT