Fujitsu 770Tx, Руководство пользователя

Страница: 163 / 201

T r o u b l e s h o o t i n g
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
153
Problem Possible Cause Possible Solution
2. You did not hold the button in long enough. 2. Hold the button longer. This may need to
be a very long time if your application is
preventing the CPU from checking for
button pushes.
3. There may be a conflict with the 3. Close all applications, and try the
application software. button again.
The system powers up, and displays 1. The boot sequence settings of the setup utility 1. Set the operating source by pressing the Esc
power on information, but fails to load are not compatible with your configuration. key while the Fujitsu logo is on screen or use
the operating system. the F2 key and enter the setup utility and
adjust the source settings from the Boot
menu on page 103.
2. You have a secured system requiring a 2. Make sure you have the right password.
password to load your operating system. Enter the setup utility and verify the
Security settings and modify them as appro-
priate. (See Security Menu on pages 89-94.)
3. Internal hard drive was not detected. 3. Use the BIOS setup utility Main menu,
Primary Master submenu to try to auto
detect the internal hard drive.