Fujitsu 770Tx, Руководство пользователя

Страница: 132 / 201

S e c t i o n F o u r
122
C A U T I O N
Data may be lost and/or system errors
introduced if the warm-swap is not
performed quickly or a power adapter is
not installed.
C A U T I O N
The bridge battery can not support an
operating notebook. The notebook must
be in Suspend mode.
Figure 4-7 Lithium ion Batter y
Lithium ion Battery
Your Lithium ion battery is durable and long
lasting but should not be exposed to extreme
temperatures,high voltages, chemicals or
other hazards.
C A U T I O N
If the Lithium ion battery connector is
not fully seated, you may not be able
to use your notebook or charge
your battery.
charged battery. The NiCd bridge battery is
built-in your notebook and is constantly being
charged. The bridge battery capacity is not
large, about 3 minutes,and can vary with the
condition of your notebook. (See page 26.)
Batteries should be removed and stored sepa-
rately in a cool dry place if your notebook is
not going to be used for an extended period
of time.
Installing the Battery
The battery may be installed singly in either
bay, using the device adapter for Multi-function
Bay 2. With the purchase of an additional bat-
tery, batteries may be installed in a dual config-
uration, one in each bay. A bridge battery allows
a charged Lithium ion battery to be exchanged
for a discharged one by “warm-swapping”. To
warm-swap, have a charged battery ready to
install,put your notebook in Suspend mode,
remove the low battery and quickly insert the
Under federal,state or local law it may be ille-
gal to dispose of batteries by putting them in
the trash.Please take care of our environment
and dispose of batteries properly. Check with
your local government authority for details
regarding recycling or disposing of your old
battery, or contact your support representative
at 1-800-8FUJITSU (1-800-838-5487).