Fujitsu 770Tx, Руководство пользователя

Страница: 63 / 201

S e c t i o n T w o
52
3. Select the Agate Tioman entry from the list of
currently installed programs.
4. Click on the Add/Remove button to launch
the uninstall application.
5. The setup wizard will guide you through the
rest of the uninstall process.
6. Tioman software will be removed completely,
the next time Windows 95 is started.
Secondary Hard Drive Swap Limitations
If you ever boot with the second HDD installed
in Multi-function Bay 2 and try to swap it,an
error message “Removing INT 13 Devices is not
supported...” appears. This error occurs because
Windows configured the hard drive as an INT
13 drive and remembers the setting in the
Registry. The following steps are required to
enable the Tioman Proswap software to swap
out the second HDD.
When you see the swap failure message perform
the following steps:
• Boot system without the second HDD
• Swap in the second HDD
• Go into Control Panel/System/Device
Manager
• Look under Disk Drives
• Select the second HDD and open properties
• Select the settings tab, in the options box
• Uncheck the INT 13 box
• Select OK, BUT DO NOT RESTART
• Shutdown system and turn the power
switch to off.
• Without the second HDD in system, turn
the power switch to on .
You must perform these steps every time
the INT 13 box becomes checked on
boot detection.
P O I N T
When the external Floppy Disk Drive is
attached to the notebook, a battery is in
Multi-function Bay 1 and any device is in
Multi-function Bay 2, the taskbar icon for
Multi-function Bay 1 will show ‘Diskette
drive in bay’ and Multi-function Bay 2’s
icon will show the correct device. If you
remove the external Floppy Disk Drive
and suspend/resume the system, the
taskbar icons for Multi-function Bay 1
and Multi-function Bay 2 will now show
the correct devices.
P O I N T
When a battery is in Multi-function Bay
1 and a Floppy Disk Drive is in Multi-
function Bay 2, the taskbar icon for
Multi-function Bay 1 will show ‘Diskette
drive in bay’ and the Multi-function Bay
2 icon will show ‘No Device in bay’.