FUSION SPLICER 90S Rev5
21
Basic Operation
Splicing work preparation
Multiple work environment configurations can be created using the carrying
case and work table.
Use of work table
In the case of use only with splicer
Use in a location which does not have vibration, a shock, etc. at the time of
performing fusion splice work. In work [at the unstable place where a main part is
shaky], the possibility of damage from a fall becomes high.
Work tray
Carrying case
Remove work table
from carrying case
Remove the fusion splicer
from carrying case and put
on top of the lid.
Arrange safety belts/devices for equipment and accessories on
the tray before use. Straps for small accessories may be
recommended. If the equipment/accessories were dropped on
a person under splicing work area, this could result in a serious
injury or fatal accident.
Do not operate the fusion splicer in an unstable or unbalanced
position. The fusion splicer may shift or lose balance, causing
the unit to fall. Possible personal injury or equipment damage
may result.
Do not operate the fusion splicer near hot objects, in hot
temperature environments, in dusty / humid conditions, or when
water condensation is present on the fusion splicer.