FUSION SPLICER 90S Rev5
28
LCD Brightness Adjustment
Monitor visibility changes depending on environmental conditions. To change
monitor brightness, press the light icon at the upper right side on READY
screen. This causes the LCD Brightness window to appear. Press the Up/Down
Arrow key to change value and press the SET key to set the value.
Wireless communication with tools
When the cleaver or the ribbon fiber stripper has been paired to the fusion splicer,
the fusion splicer and tools start wireless communication automatically.
After connecting, the status icons is displayed on the monitor.
Wind-protector automatic opening-and-closing function
If the OPEN/CLOSE key is pressed at the READY screen, the wind-protector will
open or close.
(Close)
(Open)
In addition, you can open/close it by manually.
[READY]
screen
[Brightness]
screen
90