FujiFilm PXG4, Инструкции по эксплуатации

Страница: 91 / 158

– 90 –
9
Chapter
Overview of System Parameters (Ch7)
This section explains system parameters, which specify the basic operations and controls of this device.
The following settings are available
•
USER key ( ) function settings
•
DI function settings
•
DO function settings
•
SV ramp rate settings
•
Control methods
•
Power on mode settings
Display Parameter name Function Setting range
Initial
value
Remarks Page
"
UkEy
" (UkEy) USER key allocation
settings Sets the function of the [USER]
key 0 (no function)
1 (Switches between STBY ON/OFF)
2 (Switches between Auto/Manual)
3 (Switches between Local/Remote)
4 (Do not set)
5 (Starts AT (standard))
6 (Starts AT (low PV))
7 (Do not set)
8 (Ramp SV HOLD)
9 (Ramp/soak RUN/OFF)
10 (Ramp/soak RUN/HOLD)
11 (Do not set)
12 (Latch cancel (all))
13 (Latch cancel (DO1))
14 (Latch cancel (DO2))
15 (Latch cancel (DO3))
16 (Latch cancel (DO4))
17 (Latch cancel (DO5))
18 (Start timer (DO1))
19 (Start timer (DO2))
20 (Start timer (DO3))
21 (Start timer (DO4))
22 (Start timer (DO5))
23 (SV No.+1 (send))
24 (PID No. +1 (send))
25 (Do not set)
26 (Pattern No.+1 (send))
27 (SV No. + 1, PID No. + 1 (send)) 2 93
" di1 " (di1) DI-1 function select Sets the function of DI-1 0 (no function)
1 (Switches between STBY ON/OFF)
2 (Switches between Auto/Manual)
3 (Switches between Local/Remote)
4 (Do not set)
5 (Do not set)
6 (Start AT (standard))
7 (Start AT (low PV))
8 (Do not set)
9 (Do not set)
10 (Ramp SV ON/OFF)
11 (Ramp SV HOLD)
12 (Ramp/soak RUN/OFF)
13 (Ramp/soak RUN/HOLD)
14 (Do not set)
15 (Latch cancel (all))
16 (Latch cancel (DO1))
17 (Latch cancel (DO2))
18 (Latch cancel (DO3))
19 (Latch cancel (DO4))
20 (Latch cancel (DO5))
21 (Start timer (DO1))
22 (Start timer (DO2))
23 (Start timer (DO3))
24 (Start timer (DO4))
25 (Start timer (DO5))
26 (SV No.+1)
27 (SV No.+2) 0 Note 1 94
RST
RST