FujiFilm PXG4, Инструкции по эксплуатации

Страница: 51 / 158

– 50 –
5
Chapter
Anti-reset Windup
to
Sets the anti-reset windup. Up to seven types of anti-
reset windup (palettes 1 to 7) can be recorded. Recorded
anti-rest windup can be recalled from selected PID
number ("
PPP PLLLLnnnn1111
") in the operation menu.
• Range: 0.0% to 100.0%
Setting the Anti-reset Windup
The following steps explain how to set the anti-reset windup
by using 200°C as an example.
Refer to
See "Anti-reset Windup" (p. 36) for more information on the anti-
reset windup.
1
Press and hold the key to display the setup
mode channel menu ("
ooo
oPPPPEEEE CCCChhhh 1111
") then use the
keys to display PLT ("
PPP PLLLLTTTT CCCChhhh 3333
").
Refer to
See p. 46 in this chapter for information on how to display
the channel menu.
2
Press and hold the key to display the SV
parameter ("
SSS Svvvv 1111
"), then use the keys to
display Ar1 ("
AAA
Arrrr1111
").
3
Press the key, then use the keys to
display "200.0" when the bottom part of the
display begins to blink.
Anti-reset windup is set to 200.0°C.
4
Press the key to confirm the setting.
5
Press the key to return to the operation mode
PV/SV display.
Normal/Reverse Setting
to
The following sets the normal/reverse setting. Up to
seven types of normal/reverse settings (palettes 1 - 7)
can be recorded. Recorded normal/reverse settings can
be recalled from selected PID number ("
PPP
PLLLLnnnn1111
") in the
operation menu.
Setting the Normal/Reverse Setting
The following steps explain how to set normal/reverse settings
by using heat (reverse) / cool (normal) as an example.
Range Control Operation
rv-- (heat (reverse) / cool (none))
no-- (heat (normal) / cool (none))
rvno (heat (reverse) / cool (normal))
norv (heat (normal) / cool (reverse))
rvrv (heat (reverse) / cool (reverse))
nono (heat (normal) / cool (normal))
Refer to
See "Normal/Reverse Settings" (p. 37) for more information on
normal/reverse settings,
1
Press and hold the key to display the setup
mode channel menu ("
ooo oPPPPEEEE CCCChhhh 1111
") then use the
keys to display PLT ("
PPP
PLLLLTTTT CCCChhhh 3333
").
Refer to
See p. 46 in this chapter for information on how to display
the channel menu.
2
Press and hold the key to display the SV
parameter ("
SSS
Svvvv 1111
"), then use the keys to
display rEv1 ("
rrr rEEEEvvvv1111
").
3
Press the key, then use the keys to
select "rvno" when the bottom part of the display
begins to blink.
The normal/reverse setting is now set to heat
(reverse) / cool (normal).
4
Press the key to confirm the setting.
5
Press the key to return to the operation mode
PV/SV display.
Point
For safety reasons, make sure to turn off power to the
system when switching the normal/reverse operations
while using the PID selection function. (Do not switch
between normal and reverse operation while controlling.)