FujiFilm FUJI DRI-CHEM NX600, Инструкция по эксплуатации

Страница: 11 / 268

1-3 897N203029A FDC NX600 Instruction Manual 2022.01
1 Safe Usage and Handling Precautions
1.5 Warnings Regarding Electric Shock
The voltage supplied to the equipment is AC 100 - 240 V. To avoid electrical shock, observe the fol-
lowing precautions.
• Avoid installation locations in which water may splash on the equipment.
• Make sure that the equipment is properly grounded to a protective earth lead for indoor wiring.
• Make sure that all cables have been properly connected.
Plug the power cable of the equipment into an outlet with a grounding receptacle. Otherwise, there
is risk of electrical shock.
When plugging the power cable in or removing it from an outlet, be sure to hold onto the plug body,
not just the cable. Otherwise, the power cable may be damaged and cause electric shock or fire.
Do not remove covers or other parts that are secured with screws. Doing so may result in electrical
shock from exposure to hazardous voltage or injury from moving parts.
1.6 Electromagnetic Compatibility (EMC)
This equipment conforms to the following emission and immunity requirements:
- IEC 61326-2-6:2012 (Class B)
- EN 61326-2-6:2013 (Class B)
- IEC 61326-2-6:2005 (Class B)
- EN 61326-2-6:2006 (Class B)
• The electromagnetic environment should be evaluated prior to operation of the equipment.
• Do not use this equipment in close proximity to sources of strong electromagnetic radiation (e.g.
unshielded intentional RF sources), as these may interfere with the proper operation.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to other devices, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving device.
• Increase the separation between the equipment.
• Connect the equipment into an outlet on a circuit different from that to which the other device(s)
are connected.
Consult the manufacturer or field service technician for help.
Do not use other devices (such as mobile phone) which generate and can radiate radio frequency en-
ergy near the FDC NX600. Otherwise, physical damage or malfunction on the FDC NX600 may occur.
NOTE It is the manufacturer's responsibility to provide equipment electromagnetic compatibility
information to the customer or user. On the other hand, it is the user’s responsibility to
ensure that a compatible electromagnetic environment for the equipment can be main-
tained in order that the equipment will perform as intended.
WARNING:
WARNING:
WARNING:
WARNING:
CAUTION:
1