FujiFilm CR-IR 355RU, Руководство по эксплуатации

Страница: 14 / 126

1-4
For Safe Operation
1
FCR XC-1 Operation Manual
First Edtion 11.2005 897N0565
1.3 Safety
Prior to using this equipment, please carefully read safety precautions presented herein for you to
operate it correctly.
Laser Handling Precautions
This equipment is a Class 1 laser product (IEC60825-1: 2001/EN60825-1: 2002).
FCR XC-1 (CR-IR 355RU) Laser Unit Specifications
Class
: 3B
Medium : Semiconductor laser
Wavelength : 660 nm
Maximum Output : 50 mW (CW)
The FCR XC-1 (CR-IR 355RU) incorporates a Class 3B laser with maximum output
of 50mW.
To prevent exposure to its laser beams, observe the following precautions.
●
Never open or remove the protective covers.
●
Always contact a qualified service engineer immediately if you suspect there is
a malfunction.
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Classification
1) According to the type of protection against electrical shock
CLASS 1 EQUIPMENT
2) According to the degree of protection against electric shock
NO APPLIED PART
3) Protection against harmful ingress of water
IPXO
4) According to the degree of safety of application in the presence of a flammable anesthetics mixture with
air or with oxygen or nitrous oxide.
Equipment not suitable for use in the presence of a flammable anesthetics mixture with air or with oxygen
or nitrous oxide.
5) According to the mode of operation
CONTINUOUS OPERATION